Build your Own current sensor

If you would like a quote for us to build your own custom current sensor, please enter the parameters you would like in the form below. Please note that the acceptable range for each parameter is shown in brackets.

  • All Raztec sensors offer galvanic isolation and measure DC + AC currents.
  • Raztec specialises in developing custom devices with modest investment.
  • For high volume, with Raztec support, there may be the opportunity to integrate current sensing into customers’ products to
    radically minimize cost.
Parameter
Maximum measured current (1mA to 100,000A+)
Precision of minimum measured current (0.5% to not calibrated)
Required linearity (0.05% to 5%)
Mounting: PCB, Chassis, Cable, Busbar
Required precision over temperature (1% to 5%)
Parameter
Required aperture size (Dia. 5mm to custom)
Supply voltage (3V to 24V)
Primary to secondary isolation voltage (50V to 10,000V+)
Speed of response (0.2us to 10us)
Projected production volume (1+)

Contact Details

Please provide your contact details so we can get back to you.
Name(Required)
This field is for validation purposes and should be left unchanged.

Location

Contact

Scroll to Top